Anker SOLIX C300 DC Portable Power Station User Manual
Download PDF user manual for Anker SOLIX C300 DC Portable Power Station 300W 288Wh (90000mAh) Model: A1726 (EN) 11 pages V1 2024 zip
Description
This PDF user manual is for the Anker SOLIX C300 DC Portable Power Station.
About the Item
Anker SOLIX C300 DC Portable Power Station 300W 288Wh (90000mAh) Model: A1726
– To activate C300 DC Portable Power Station for the first time: Recharge with an 18W or higher USB-C wall charger, such as an Anker USB-C charger or laptop charger. Note that only the USB-C2 and USB-C3 ports can be used.
– This 90,000mAh (288Wh) battery delivers 300W and includes two 140W two-way USB-C fast charging ports.
– Power all your tech on the go with versatility, no matter the connection type.
– Attach the strap (sold separately) with a 30% smaller power station for complete portability.
– Give your journey endless charging with up to 100W solar recharging. We recommend 100W or 60W Anker Solar Panel. This power station is not compatible with Anker SOLIX PS30 (or other 5V~3A USB-C panels), PS200, PS400.
– Fast Recharge to 80% in an hour minutes with the dual PD 3.1 USB-C port. You can also use solar panels or your car.
Read all the instructions before using the product. Save these instructions.
(PDF) USER MANUAL (ENGLISH)
SUMMARY OF CONTENTS
WHAT’S IN THE BOX
OVERVIEW
– Product appearance
– Names of parts
– Names of buttons and input/output ports
RECHARGE YOUR POWER STATION
– Solar Panel Recharging (100W Max)
– USB-C Recharging (280W Max)
– Car Recharging
POWERING YOUR DEVICE
– Power On/Off. How to turn your power station on or off. How to turn the screen on or off. How to set the screen auto off time? How to set standby duration?
– USB Charging
– Car Socket Charging
LIGHT
– Ambient Light. How to switch between brightness levels.
LCD SCREEN GUIDE
– Description of icons and symbols.
– How to turn on Bluetooth and Wi-Fi.
– How to turn off Bluetooth and Wi-Fi.
– How to reset Bluetooth and Wi-Fi.
THE ANKER APP FOR SMART CONTROL
You can remotely control your power station using the Anker app.
– How to download the Anker app.
– How to connect the device to a network.
– How to update the firmware. How to install Firmware Update.
FAQ
Q1: Can Anker SOLIX C300 DC Portable Power Station power a CPAP machine?
A1: Yes.
Q2: What should I do when using a solar charger to charge Anker SOLIX C300 DC Portable Power Station?
A2: The solar input supports an 11-28V solar charger with an XT-60 connector. We recommend using Anker 100W / 60W Solar Panel for the best compatibility.
Q3: Can the USB-C ports be used to charge Anker SOLIX C300 DC Portable Power Station (input only), or are they output only?
Q3: The USB-C1 and USB-C4 ports are output only. The USB-C2 and USB-C3 supports output and input.
Q4: How do I reset Anker SOLIX C300 DC Portable Power Station?
A4: If your power station isn’t working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory reset. If the power station still doesn’t work, please contact Anker
Q5: Why is the power station not working after it hasn’t been used for a long time?
A5: If the power station is stored at a low capacity for a long time, lithium batteries will self-consume power which may lead to a quick discharge. This often leads to poor conductivity and a reduced battery lifespan that causes the battery not to work.
Q6: How should I store and maintain the power station?
A6: When storing your portable power station, please make sure that you:
1) Turn off the main power button.
2) Store the power station in a dry and cool environment.
3) Check the remaining battery capacity each week. If the battery level is below 30%, fully charge the power station. Don’t forget to charge it to 100% once every 3 months.
Q7: Does the power station have to be used upright?
A7: Yes, the product needs to be used and stored upright.
Q8: Does the Anker SOLIX C300 DC Portable Power Station need to be recharged before first use?
A8: Before using C300 DC first time, recharge it to activate the unit.
Activation method:
1) PD charging activation: Requires a 9V or above charger.
2) MPPT charging activation: Solar panel output voltage range 11~28V.
SPECIFICATIONS
USB POWER DISTRIBUTION TABLE
The total output of this product is 300W, please be careful when using multiple interfaces.
Why Download the Manual?
This user manual provides all the information from Anker about the SOLIX C300 DC power station, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.
How to Download the Manual?
Download it by clicking the button below
Helped you out?
Glad to hear that. It would be awesome if you could . . .