CAT CJ3000 / CJ3000CA Professional Jump-Starter Instruction Manual
Download PDF user manual for Caterpillar CAT CJ3000 / CJ3000CA Professional Jump-Starter 1000-Amp (2000-Amp peak) (EN|FR|ES) 16 pages RD033021 2021 zip
Description
This PDF instruction manual is for the CAT CJ3000 / CJ3000CA Jump-Starter.
About the Item
CAT CJ3000 / CJ3000CA 1000-Amp (2000-Amp peak) Professional Jump-Starter
Read all instructions before operating this unit. Retain for future reference.
(PDF) INSTRUCTION MANUAL (ENGLISH) / MANUEL D’UTILISATION (FRANÇAIS) / MANUAL DE INSTRUCCIONES (ESPAÑOL)
SUMMARY OF CONTENTS
FEATURES
– Product view
– Names of parts, buttons, switches, indicators
SAFETY GUIDELINES / DEFINITIONS
– Risk of unsafe operation
IMPORTANT SAFETY INSTRUCTIONS
– Ground Fault Circuit Interrupter (GFCI) protection
– Use of accessories and attachments
– Specific safety instructions for charging this unit
– Extension cords
– Minimum gauge for cord sets
SPECIFIC SAFETY INSTRUCTIONS FOR JUMP STARTERS
PERSONAL SAFETY
INTRODUCTION
CHARGING/RECHARGING
– Charging/Recharging Using the 120 Volt AC Charger and a Standard Household Extension Cord
JUMP-STARTER
– Procedure for jump-starting a NEGATIVE GROUNDED SYSTEM (negative battery terminal is connected to chassis) (MOST COMMON)
– Procedure for jump-starting POSITIVE GROUND SYSTEMS
12 VOLT DC PORTABLE POWER SUPPLY
This portable power source is for use with all 12 volt DC accessories equipped with a male accessory outlet plug and are rated up to 5 amps.
LED AREA LIGHT/LED EMERGENCY FLASHER
The built-in white area light and red LED emergency flasher are controlled by the area light power button. Refer to the “Controls and Functions” section to locate.
CARE AND MAINTENANCE
TROUBLESHOOTING
Unit will not charge
– Make sure the jump-starter power switch is in the off position.
– Make sure a suitable gage extension cord is properly connected to both the unit and a functioning AC outlet.
Unit fails to jumpstart
– Make sure unit’s power switch is in the on position.
– Check that jump-starter has a full charge. Recharge unit if necessary.
– Make sure a proper polarity cable connection has been established.
12 volt DC portable power supply will not power appliance
– Make sure the appliance does not draw more than 5 amps.
– Check that the unit has a full charge. Recharge unit if necessary.
LED area lights/ LED emergency flasher do not come on
– Make sure the area light power button is in the on position
– Check that the unit has a full charge. Recharge the unit if necessary.
ACCESSORIES
SERVICE INFORMATION
WARRANTY
SPECIFICATIONS
– Boost Ampere: 12V DC, 1000A instantaneous
– Battery Type: Maintenance-free, sealed lead acid, 12V DC
– AC input: 120V AC, 60Hz, 0.6A
– LED Area Light/ LED Emergency Flasher: 3 white LEDs, 3 red LEDs
– DC Accessory Outlet: 12V DC, 5A
Why download the Manual?
This instruction manual provides all the information from CAT / Caterpillar about the CJ3000 / CJ3000CA jump-starter, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.
How to download the Manual?
Download it by clicking the button below
Helped you out?
Glad to hear that. It would be awesome if you could . . .
