Duraflame DFS-750-6 Electric Stove (with Heater) Instruction Manual
Download PDF user manual for Twin-Star International / Duraflame DFS-750-6 Vent Free Decorative Electric Stove with Heater, 1500 Watts (EN) 10 pages zip
Description
This PDF instruction manual is for the Duraflame DFS-750-6 Electric Stove with Heater.
About the Item
Duraflame DFS-750-6 Vent Free Decorative Electric Stove with Heater 1500W
PRODUCT SPECIFICATIONS
– Voltage: 120 VAC, 60 Hz
– Amps: 12.5 Amps
– Watts: 1500 Watts
Please read the Installation & Operating Instructions before using this appliance. Save these instructions.
DOCUMENT(S) AVAILABLE
(PDF) INSTRUCTION MANUAL
Available Languages
ENGLISH (EN)
SUMMARY OF CONTENTS
HOW TO CONTACT CUSTOMER SERVICE
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons.
PACKAGE CONTENTS
– What’s in the box
PREPARATION
– Estimated Assembly Time: 15 minutes
– Tools Required for Assembly
– Mounting legs to the stove body
– Mounting door pull to the stove body
STOVE LOCATION
ELECTRICAL CONNECTION
HOW TO ACCESS CONTROL PANEL
POWER:
The Power switch supplies power to all of the functions of the fireplace and will illuminate the flame effect. This switch must be in the ON position for any of the functions to work.
NOTE: Holding the POWER button on the control panel for 10 seconds will disable the heater function. Re-activate the heater function by holding this button for 10 seconds again. The controls will beep several times when this function is activated.
HEAT:
Your fireplace consists of a fan-forced wire element type heater. The HEATER switch turns the heater ON and OFF. This switch must be in ON position for the heater function to work.
TEMPERATURE:
The Temperature control knob regulates the temperature level of the heater. The further the knob is rotated clockwise, the higher the set point temperature. Turning the knob counter-clockwise will lower the set point temperature. Use this function to help regulate the ambient temperature level.
BRIGHTNESS:
Use + – to increase or decrease the flame brightness levels.
NOTE: Please operate remote transmitter at a slow measured pace.
Press the remote control buttons with an even motion and gentle pressure.
Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction.
REPLACING THE REMOTE CONTROL BATTERIES (2pcs AAA batteries)
CARE AND MAINTENANCE
– Clearance To Combustibles
– Cleaning Trim
– Replacing The Light Bulb (120-V, 40-watt, E12 socket base light bulb / candelabra base, B bulb).
MAINTENANCE OF MOTORS
TROUBLESHOOTING
1. No power, switches do not light up.
– Power cord was not plugged into the outlet.
2. Switches light up, but no flame effect.
– Broken or loose bulb.
3. Logs glow, flame effect does not work.
– Spinner fell from bracket
– Spinner motor doesn’t work.
4. Flame effect operates, but heater does not blow warm air.
– Heater switch is in “OFF” position.
– Thermostat is in low position.
5. Heater doesn’t work, but Power and Heater switches are in the “ON” position and thermostat is set on the highest level.
– The thermal protector has tripped.
– The HEATER function is locked.
WARRANTY
– This warranty is void if
– If warranty service is needed
REPLACEMENT PARTS LIST
– Part / Description / Part No.
Why download the Manual?
This instruction manual provides all the information from Twin-Star International / Duraflame about the DFS-750-6 stove with heater, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.
How to download the Manual?
Download it by clicking the button below
Helped you out?
Glad to hear that. It would be awesome if you could . . .
