Yato YT-83092 Portable Power Station Instruction Manual

Description

This PDF instruction manual is for the Yato YT-83092 power station.

About the Item

Yato YT-83092 Portable Battery Station (with UPS) 1200W (2400W peak) 917Wh Li-ion 230V

Portable 917 Wh battery power station with UPS function. It will support eleven devices at a time. The built-in bidirectional AC inverter with pure sine wave with a power rating of 1200 W (up to 2400 W at peak) will prove useful as an emergency power source for, among other things, the central heating furnace pump and controller, router, desktop computer, most power tools and many other devices. Six USB ports, including two USB-A with Q.C techonolgy max 18 W, two USB-C with PD 60W technology and PD 100W technology, will power and repeatedly charge a smartphone, tablet or laptop. A 12-volt socket will successfully power a touring fridge or dedicated lighting. The two jack sockets with 12 V output can be used, for example, to hold the voltage in the car while the battery is charging.

– The UPS function ensures continuity of operation of the connected devices in the event of a power failure, and will handle devices with a total rated power of 500 W. In the event of a power failure, the module will switch from mains power to battery power in no more than 20 milliseconds (imperceptible to the devices).
– the energy reserve at full charge and constant 500 watts is sufficient for approximately two hours of continuous operation
– Built-in power bank with 98 Li-Ion high discharge rate cells in NMC/INR technology in 18650 housing with a nominal voltage of 3.6 V and a capacity of 2600 mAh (total 254800 mAh)
– capacity does not drop below 80% of the initial value even after 500 full discharge cycles
– cells arranged in a robust cage with a design that allows free access of air to each cell, significantly improving cooling efficiency
– an advanced BMS that monitors all current parameters and cell temperature in real time, ensuring a safe charging and discharging process
– The BMS has overcurrent, short-circuit, over-discharge, over-voltage and overheating protection.
– cell balancing system extends the life of the entire pack
– a special USB-C port for the excitation of the cell pack – if you leave the station discharged to 0% for a long time and the device does not react to the connected charger, with the help of a 5 V, 2 A power supply we can excite the cells and restore the station and the BMS to operation
– the charging of the station is possible in three ways: thanks to a bidirectional converter, fast charging directly from the mains socket, via a cable under the cigarette lighter or from external photovoltaic panels
– as one of the few on the market, it has an embedded MPPT charge controller, which allows full use to be made of the energy supplied by the panels, without cutting off excess voltage
– manufactured to automotive standards
– harmonic content ratio (THD) at full load: less than 3%
– operating time at the unit’s rated load (1200 W): 40 min
– charging time from the mains socket: ~1,4 h
– charging time from cigarette lighter: 6-9 h
– charging time from photovoltaic panels: ~6 h
– Continuous power from AC 230 V sockets: 1200 W (2400 W peak)
– cigarette lighter socket: 12V/10A
– 2 jack sockets: 12V/10A
– 2 USB-A sockets: 5V/3.1A
– 2 USB-A sockets: 18 W with Q.C. technology. 3.0
– 2 USB-C sockets: 60 W and 100 W in PD technology
– BMS protection: overcurrent, short-circuit, over-discharge, over-voltage, overheating
– inverter protection: under- and overvoltage protection, short-circuit protection
– LED light with 3 modes, including SOS, 2W
– dimensions: 387 x 285 x 219 mm
– weight: 12kg

Read the entire instructions manual before using the product and keep it for future reference. If you pass the product on to others, please do so together with the instructions manual.

Document(s) available

(PDF) INSTRUCTION MANUAL

Available languages

ENGLISH (EN) | DEUTSCH (DE) | FRANÇAIS (FR) | ESPAÑOL (ES) | ITALIANO (IT) | PORTUGUÊS (PT) | БЪЛГАРСКИ (BG) | ČEŠTINA (CS) | ΕΛΛΗΝΙΚΆ (EL) | HRVATSKI (HR) | MAGYAR NYELV (HU) | LIETUVIŲ KALBA (LT) | LATVIEŠU VALODA (LV) | NEDERLANDS (NL) | POLSKI (PL) | ROMÂNĂ (RO) | РУССКИЙ (RU) | SLOVENČINA (SK) | УКРАЇНСЬКА (UA) | اَلْعَرَبِيَّةُ (AR)

SUMMARY OF CONTENTS

(PDF) YATO YT-83092 PARTS LIST AND EXPLODED VIEW

Why download the Manual?

This instruction manual provides all the information from TOYA / Yato about the YT-83092 power station, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .