Pecron E3000 Portable Power Station User Manual

Description

This PDF user manual is for the Pecron E3000 Portable Power Station.

About the Item

Pecron E3000 Portable Power Station 2000W / 3108Wh

With its 3108Wh battery capacity, 2000 wattage capacity (surge 4000W), Pecron E3000 is capable of running most home essentials for hours or even days at a single charge. It can be widely used in situations including power outages, outdoor workshops, camping, emergency backup and so on.
E3000 has 16 output ports that can run up to 16 devices at a time. Including 6 x 2000W AC outlets, 6 x USB ports up to PD 100W, 1 x cigarette port, 2 x DC ports, and 1 x 15W wireless charger, it’s an ideal all-in-one power solution for your phones, tablets, laptops, portable refrigerator, drone, camera, and more.
Pecron E3000 adopts three independent MPPT charge controllers that support a maximum 1300W solar input; Utilizing Pecron latest UBSF charging technology to achieve a balance between speed and safety, it allows E3000 to be quickly recharged in just 3 hours without compromising its life cycles.
UL-certified EV grade battery stands out not only for its smaller size-higher energy density-but also allow for a wider operational temperature range. Build-in BMS assures self-protection from short-circuiting, overloading, and overheating; 110V pure-sine wave inverter make sure there is no damage to your sensitive electronic devices.

Please read the user manual thoroughly before using this product, and keep this manual in a safe place for future reference.

(PDF) USER MANUAL (ENGLISH)

SUMMARY OF CONTENTS

– Function Introduction
– Specifications
– Output Specs
– Input Specs
– How To Use The Pecron E3000
– LCD Smart Display. Temperature Alarm Icon. AC Overload Alarm Icon.
– Packing List
– Recharge Time
– Solar Charge Time
– Using Solar Panels To Charge The Pecron E3000: 1 x DC5521 Charging Port. 2 x GX16MF-5 Charging Port.

FAQs (Frequently Asked Questions):

Q: What kind of battery is used in Pecron E3000? How long it can last?
A: E3000 utilizes high quality UL certified automotive battery cell, it can retain 80% efficiency after 1000 complete charge cycles.

Q: What devices can Pecron E3000 power?
A: E3000 can power most devices with power consumption less than 2000 watts.

Q: Can the Pecron E3000 be used as UPS?
A: The UPS function is not supported.

Q: Can the Pecron E3000 be charged while discharging?
A: Yes, E3000 can run devices while it is being charged. The battery will eventually run out if the discharging is greater than the charging during the pass through charging.

Q: How to calculate the Pecron E3000 running time?
A: Running Time = Total Capacity (3108Wh) * 0.85 (Depth of Discharge) / Loading Power (Watts)

Q: Can I use the Pecron E3000 indoors and charge the E3000 indoors?
A: Yes, the E3000 is safe to use indoors.

Q: Does Pecron E3000 have built-in MPPT controller?
A: Yes, there are two independent 600W (PV 32V~95V) MPPT charge controllers inside, and one step up 100W (PV 18V) MPPT charge controller. The Voc ( Open Circuit Voltage) of the solar panels should not exceed 95V.

Q: What kind of maintenance does Pecron E3000 require?
A: Charging E3000 in time when the battery running low; And please charge it at least once for every six months even if it is not being used.

Q: How to store the Pecron E3000?
A: Do not store, charge or use E3000 near heat sources, or in an area exposed to flammable or corrosive gas; Do not immerse in water. Keep away from liquids and store it in a cool and dry place.

Why download the Manual?

This user manual provides all the information from Pecron about the E3000 portable power station, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .