AU1215XB Aurora 12-sheet Cross-Cut Paper Shredder User Manual

Description

This PDF user manual is for the Aurora AU1215XB ShredSafe 12-sheet cross-cut shredder.

Aurora AU1215XB ShredSafe 12-sheet Cross-Cut Paper Shredder with P-3 Security Level

Designed for medium shredding in the home or home office, this compact shredder delivers a high level of performance and features. This reliable machine includes ShredSafe technology where a safety power shut-off will engage when “forced entry” is detected. When not in use, the cover plate completely closes the feed entry. Durable steel cutters shred documents up to 12 sheets of paper or 1 credit card per pass into 7/32″ x 2 5/32″ (0.56 cm x 5.5 cm) pieces. Dedicated feed slots enables CD destroying. Includes an integrated handle for easy emptying of the 4.8-gallon wastebasket. Free-rolling 360° swivel casters allow for easy mobility.

Please read these operating instructions before using the unit.

(PDF) USER MANUAL (ENGLISH) (FRANÇAIS) (ESPAÑOL)

CONTENTS

– Operating Instructions
– Installation
– Operation. Control switch: AUTO, OFF, REV.
– CD/DVD destroyer
– LED Status indicators description – Power On (green light), Paper Overload (red light), Overheat (red light), Shredder Misaligned (red light).
– Maintenance. Oiling.
– Cleaning
– Warnings
– Warranty
– Troubleshooting:

The shredder does not work at all.
a) Make sure the unit is plugged in and that the outlet it is plugged into is in good working order.
b) In the event that the shredder is run continuously for too long and the motor overheats, a thermal overload switch will automatically shut the power off. If this happens, move the switch to the off position for 30 minutes or more before continuing.

The shredder runs in “Rev” mode but not in “Auto” mode.
a) While in “Auto” mode, the motor will not start running until paper is inserted into the feed slot. Set the unit to “Auto” and insert paper to be shredded. It is normal for the motor to run for a moment after setting it to “Auto” but it should stop until paper is inserted. The trigger that activates the shredder in Auto mode is located directly in the center of the slot. If the paper you are inserting is narrow, it may not be hitting the switch. It is possible that the trigger, which activates the shredder, has become blocked with paper. Insert an index card, directly in the center of the feed slot, and apply force. This will usually clear any paper blocking the switch and force the switch closed.

Why Download the Manual?

This user manual provides all the information from Aurora about the AU1215XB ShredSafe 12-sheet cross-cut shredder, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to Download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .