Aeris Atmos Elite Dive Computer Owner’s Guide

Description

This PDF owner’s guide is for the Aeris Atmos Elite dive computer.

About the Item

Aeris Atmos Elite Dive Computer

Your Atmos Elite presents the information that you need before, during, and after your air (or nitrox) dives using a combination of easy to read displays and identification icons. It can also be set to operate simply as a digital depth gauge/timer.

This instructional guide is intended to help you become familiar with the functions and features available and show you examples of displays that you could expect to see in the various operational modes.
Ensure that you read through this complete Owner’s Guide.

Remember that the rules you learned in your basic scuba certification course(s) still apply to the diving you will do while using a dive computer – some will become even more important.
Technology is no substitute for common sense, and a dive computer only provides the person using it with data, not the knowledge to use it.

The documents listed below are for reference only. For specific operational details, consult the original paper documents included with your product.

(PDF) OWNER’S GUIDE (EN)

SUMMARY OF CONTENTS

– Warranty
– Notices
– Decompression Model
– FCC Statement
– LCD Layout

FEATURES AND DISPLAYS
– Control Buttons
– Bar Graphs. Nitrogen Bar Graph. Oxygen (O2) Bar Graph. Variable Ascent Rate Indicator.
– Informational Displays. Tank Pressure Display. Depth Displays. Time and Date Displays. Temperature Display.
– Audible Alarm
– Backlight
– Power Supply. Low Battery Condition.
– FO2 Mode. FO2 50% Default.
– Dive Time Remaining

ACTIVATION AND SETUP
– Pressure Transmitter
– Activation
– Serial Number
– Backup Activation
– Surface Mode
– Set Modes. Entering Settings – Set Mode #1. Entering Settings – Set Mode #2.

PRE DIVE PLAN MODE
– Dive Planner

DIVE MODES
– Transmitter Signal Reception
– Positioning Of Display Module. Link Interruption Underwater.
– Dive Mode Bar Graphs
– Control Of Displays
– No Decompression Dive Mode
– Decompression Dive Mode
– Violation Modes
– High PO2 Dive Mode
– High Oxygen Accumulation
– User Set Digital Gauge Mode

POST DIVE MODES
– Post Dive Surface Mode
– Transition Period
– After The Transition Period (The First 2 Hours). Log Mode.
– After The First 2 Hours
– Downloading Data to a PC

SIMULATOR (DEMO) MODE

CARE, MAINTENANCE, AND SERVICE
– Care And Cleaning
– Inspections And Service
– Battery Replacement
– Transmitter Installation
– Transmitter Compatibility With Nitrox

POWER
– Display Module Battery: 1 – 3 vdc, type CR2450 Lithium battery
– Transmitter Battery: 1 – 3 vdc, type CR2, 0.75 Ahr Lithium battery (Duracell model DL-CR2 or equivalent)
– Shelf life: Up to 5 years
– Replacement: User replaceable (annual recommended)
– Life expectancy: 50 dive hours (if 1 – 1 hour dive per dive day) to over 150 dive hours (if 3 – 1 hour dives per dive day)

REFERENCE
– Decompression Model
– Tissue Compartment Control
– No Decompression Limits
– Oxygen Exposure Limits
– Altitude Diving
– Flying After Diving

SPECIFICATIONS

GLOSSARY

INSPECTION/SERVICE RECORD

RESET PROCEDURE

Why Download the Manual?

This owner’s guide provides all the information from Aeris about the Atmos Elite dive computer, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to Download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .