Anker SOLIX C800 Portable Power Station User Manual
Download PDF user manual for Anker SOLIX C800 Portable Power Station 1200W 768Wh LiFePO4 Model: A1753 (EN|DE) V2 zip
Description
This PDF user manual is for the Anker SOLIX C800 Portable Power Station.
About the Item
Anker SOLIX C800 Portable Power Station 1200W 768Wh LiFePO4 Model: A1753
Power up outdoor activities with Anker SOLIX C800 Portable Power Station. With 768Wh capacity and 1200W output, charge speakers, a guitar, and a cooler for non-stop entertainment.
– 768Wh and High-Performing 1200W Rated Power and recharging in just 58 minutes.
– Achieve 80% battery capacity in just 2.3 hours with 300W max solar input.
– Monitor energy intelligently via the app and recharging in just 58 minutes.
– Plug in up to 10 appliances all at once and no energy limits under 1600W with SurgePad technology.
– 10-year long-Lasting LFP batteries with 3,000 Cycles
(PDF) USER MANUAL (ENGLISH) (DEUTSCH)
SUMMARY OF CONTENTS
WHAT’S IN THE BOX
OVERVIEW
– Product Overview
– Product Appearance
– Description of buttons, indicators, input/output ports
LCD SCREEN GUIDE
– Description of icons and symbols
– How to turn on Bluetooth and Wi-Fi
– How to turn off Bluetooth and Wi-Fi
– How to reset Bluetooth and Wi-Fi
RECHARGING YOUR POWER STATION
– AC Recharging (750W Max)
– UltraFast Recharging (1100W Max). How to activate UltraFast Recharging.
– Solar Panel Recharging (300W Max)
– Car Recharging
POWERING ON / OFF
– How to turn your power station on or off.
– How to turn the screen on or off.
– How to set screen auto-off time
– How to set standby duration
POWERING YOUR DEVICES
– AC Charging
– USB Charging
– Car Socket Charging
UNINTERRUPTIBLE POWER SUPPLY (UPS)
To use the UPS feature, connect your power station to a wall outlet with the AC charging cable, then press the AC outlet button and connect your devices via the AC output ports.
SURGEPAD
Using the SurgePad feature, the power station can power high-wattage devices up to 1600W without overload.
ANKER APP FOR SMART CONTROL
You can remotely control your power station using the Anker app.
– How to download the Anker app
– How to connect the device to a network
– How to update the Firmware
LIGHT
– Ambient light. How to turn on the ambient light? How to switch between brightness levels?
– SOS Mode. How to turn on SOS mode.
FAQ
Q1: What is the maximum power output of the AC output ports?
A1: The AC output ports can deliver a maximum of 1200W rated power to connected devices.
Q2: What should I do when using a solar charger to charge my power station?
A2: The solar input supports an 11-60V solar charger with an XT-60 connector. The supported current is 10A max. We recommend using Anker solar panels (200W or 400W) to get the best compatibility.
Q3: Can the USB-C ports charge the power station (input only), or are they output only?
A3: The USB-C ports support output only.
Q4: What should I do when AC recharging fails?
A4: If AC recharging does not work, check if the overload protection switch is turned on. If it is on, press down to reset and then continue recharging.
Q5: How do I reset my power station?
A5: If your power station is not working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory reset. If the power station still doesn’t work, please contact Anker.
Q6: Why is the power station not working after it hasn’t been used for a long time?
A6: If the power station is stored at a low capacity for a long time, lithium batteries will self-consume power which may lead to a quick discharge. This often leads to poor conductivity and a reduced battery lifespan that causes the battery not to work.
Q7: How should I store and maintain the power station?
A7: When storing your power station, please make sure that you:
1) Turn off the main power button.
2) Store the power station in a dry and cool environment.
3) Check the remaining battery capacity each week. If the battery level is below 30%, fully charge the power station. Do not forget to charge it to 100% once every 3 months.
SPECIFICATIONS
Why Download the Manual?
This user manual provides all the information from Anker about the SOLIX C800 power station, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.
How to Download the Manual?
Download it by clicking the button below
Helped you out?
Glad to hear that. It would be awesome if you could . . .
