Baldr MP330 Portable Power Station User Manual

Description

This PDF user manual is for the Baldr MP330 Multi-Purpose Portable Power Station.

Baldr MP330 Multi-Purpose Portable Power Station 330W (700W Surge) / 297Wh Li-ion

The BALDR 330 is a portable battery pack with the ability to supply 330W of pure sine wave AC power via the onboard AC output. The Baldr330 portable power station has powerful functions and can be used for your home, travel, or camping.
This power station uses a battery management system (BMS) to improve battery utilization. This system will extend battery service life through short circuit protection, overcurrent protection, overvoltage protection, overload protection, overheating protection, and other functions. In addition, the portable generator is equipped with a wireless charger and a built-in multi-mode flashlight, which can quickly charge the mobile phone in case of emergency and help with an LED SOS mode.
5W Wireless Charger: While enjoying your favorite outdoor activities, you can charge your phone wirelessly by placing your phone on top of the power station.

(PDF) USER MANUAL (ENGLISH)

CONTENTS

– General Specifications
– Warnings
– Feature Details
– Button Feature: Power ON/OFF Button; SOS mode & LED light Button; DC Output Power ON/OFF Button; USB Output Power ON/OFF Button; AC Output Power ON/OFF Button.
– LCD features: Battery Level Indicator; Input Status; DC Output Status; AC Output Status.
– How to charge: From Solar Charger; From Car Port 12V; From Wall Charger 110V.
– What It Powers
– Function Buttons
– Details Displayed On LCD
– Operating Instructions
– Powering / Charging Devices With Baldr 330. Pass-Through Charging. Overload Condition.
– Baldr 330 Accessory List
– Cleaning
– Storage
– Attention
– Maintenance
– Disposal/Recycle
– Warranty

– TROUBLESHOOTING:

BALDR 330 WILL NOT CHARGE OR OPERATE CONNECTED DEVICES:
Ensure that the DC/USB/AC output ports 2/3/4/5/6 are activated by pressing the Button(s) A & C/D/E for the port(s) in use.
Confirm the connected device is suitable for the BALDR 330 by reviewing the output specifications provided in the GENERAL SPECIFICATIONS section. Confirm BALDR 330 is charged by reviewing the Battery Level Indicator H. Verify the watt data displayed on the Status Indicator I/J/K of LCD Screen 1 for overload condition.

BALDR 330 WILL NOT CHARGE:
Confirm that the wall plug power adapter’s cord is inserted fully into the DC Input 8. Confirm that the AC wall plug power adapter is the charger provided with BALDR 330. If the input does not comply with the requirements located in the GENERAL SPECIFICATIONS section, the Low Watt range 0 to 10 may be displayed on INPUT STATUS I of LCD screen 1.

Why download the Manual?

This user manual provides all the information from Baldr about the MP330 Multi-Purpose Power Station, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .