Black+Decker BC40BD 40-Amp Battery Charger (with Engine Start) Instruction Manual
Download PDF user manual for Baccus Global / Black & Decker Automatic 40-Amp Bench Battery Charger Model: BC40BD (with 110-Amp Engine Start) (EN) 20 pages 2021 zip
Description
This PDF instruction manual is for the Black+Decker BC40BD battery charger.
About the Item
Black+Decker Automatic 40 Amp Bench Battery Charger Model: BC40BD (with Engine Start)
– 0-40 amp Fully Automatic Charger/ Maintainer
– Charge and maintain any AGM, GEL and WET automotive or marine 12 volt batteries
– Fully Automatic high frequency charging
– 110 amp Engine Start: re-start most vehicles in up to 90 seconds keeps battery at optimal capacity during off-season
– Patented alternator check and battery voltage check
– Battery reconditioning feature helps extend battery life
– Reverse polarity protection
– LCD Screen with easy to read icons
– AC Low-voltage compensation ensures maximum performance when used with extension cords
Read this Instruction Manual and follow the instructions carefully before using your new battery charger. Save this manual for future reference.
Document(s) available
(PDF) INSTRUCTION MANUAL
Available languages
ENGLISH (EN)
SUMMARY OF CONTENTS
FEATURES
– Product view
LCD DISPLAY DETAIL
– Description of icons and symbols
SAFETY GUIDELINES / DEFINITIONS
IMPORTANT SAFETY INSTRUCTIONS
– General safety warnings and instructions
– Specific safety instructions for power cords
– Extension cords
– Recommended Minimum AWG Size for Extension Cords for Battery Chargers
– Power cord safety
– Specific safety instructions for battery chargers
– Personal safety
The BC15BDCA was designed for household use only. The BC25BDCA and BC40BDCA were designed for both household and commercial use.
INTRODUCTION
PREPARING TO CHARGE
– Charger location
– Connection precautions
– Charging a battery installed in a vehicle
– Charging a battery that has been removed from a vehicle
OPERATING INSTRUCTIONS
– Charging the battery
– Checking the battery voltage
– How to check the battery voltage in standby mode
– How to check the battery voltage in charging mode
– Using the alternator check function:
Part 1 – No Load (turn OFF all vehicle’s accessories):
Part 2 – Under Load (accessories ON)
– Reconditioning the battery
– Using the engine start function
TROUBLESHOOTING
– Unit Not Charging
CARE AND MAINTENANCE
– Cleaning and storage
ACCESSORIES
SERVICE INFORMATION
WARRANTY
BC40BD SPECIFICATIONS
Input: 120V AC, 60Hz, 740W
Output: 12V DC, 40A
110A engine start (ON: 5 seconds, OFF: 5 minutes)
Why download the Manual?
This instruction manual provides all the information from Baccus Global / Black+Decker / Black & Decker about the BC40BD battery charger, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.
How to download the Manual?
Download it by clicking the button below
Helped you out?
Glad to hear that. It would be awesome if you could . . .
