Black & Decker J752BCB 750A peak Jump Starter (with Battery Charger) Instruction Manual

Description

This PDF instruction manual is for the Black & Decker J752BCB jump starter.

About the Item

Black & Decker 375-Amp (750 Peak Amp) Jump Starter with 2-Amp Battery Charger / Maintainer Model: J752BCB

– 750 PEAK amps, 375 starting amps to restart vehicle instantly
– 200 Watt AC Inverter
– Dual USB Ports
– Front-mounted LED worklights
– Visual and audible reverse polarity alarm
– Power and charge indicator
– All-metal powder-coated clamps

Please read this guide carefully before use to ensure optimum performance and avoid damage to the unit or items that you are using it with. Save these instructions.

Document(s) available

(PDF) INSTRUCTION MANUAL / MANUAL DE INSTRUCCIONES

Available languages

ENGLISH (EN) | ESPAÑOL (ES)

SUMMARY OF CONTENTS

SAFETY GUIDELINES / DEFINITIONS

IMPORTANT SAFETY INSTRUCTIONS
– General safety warnings and instructions
– Specific safety instructions for Power Cords
– Recommended Minimum AWG Size for Extension Cords for Battery Chargers
– Specific safety instructions for jump starters
– Specific safety instructions for battery chargers
– First aid

INTRODUCTION

FEATURES
– Product view
– Names of parts

CHARGING/RECHARGING THE JUMP-STARTER , 12 VOLT DC PORTABLE POWER SUPPLY AND AREA LIGHT

CHARGING/RECHARGING THE JUMP-STARTER USING THE 120 VOLT AC CHARGER AND A STANDARD HOUSEHOLD EXTENSION CORD

JUMP-STARTER
This Jump-Starter is equipped with an On/Off Power Switch. Once the connections are properly made, turn the switch on to jump-start the vehicle.

12 VOLT DC PORTABLE POWER SUPPLY
This portable power source is also for use with all 12 volt DC accessories equipped with a male accessory outlet plug and are rated up to 5 amps.

AREA LIGHT
The built-in 2-LED area light located in the front of the unit is controlled by the area light on/off button on the front panel (refer to the Features section to locate). Press the area light on/off button once to turn the light on. Press the area light on/off button again to turn the area light off. Make sure the area light and the unit are turned off when the unit is being recharged or stored.

BATTERY CHARGER
– Preparing to Charge
– Charger Location
– Charging Using the Supplied Battery Clamps
– Connecting and Charging the Battery with the Terminal Rings
– Charging Using the 12 Volt DC Vehicle Adapter Plug

TROUBLESHOOTING
Jump-Starter, 12 Volt DC Power Supply and LED Area Light:
– Unit will not charge
– Unit fails to jump-start
– 12 volt DC portable power supply will not power appliance
– LED Area Light does not come on
Battery Charger:
– Unit fails to charge the battery

CARE AND MAINTENANCE
– Battery replacement
– Safe Battery Disposal
– Fuse Replacement (12 volt DC Vehicle Adapter Plug)

ACCESSORIES

SERVICE INFORMATION

WARRANTY

SPECIFICATIONS
Jump-Starter:
– Boost Ampere: 12Vdc, 375A instantaneous
– Battery Type: Maintenance-free, sealed lead acid, 12Vdc, 9Ah
– AC input: 120Vac, 60Hz, 12W
– DC Accessory Outlet: 12Vdc, 5A
Battery Charger:
– Input : 120 volts AC, 60Hz, 0.6A
– Output: 12 volts DC, 2A

Why download the Manual?

This instruction manual provides all the information from Baccus Global / Black+Decker / Black & Decker about the J752BCB jump starter, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .