CAT CBC25E / CBC25ECA Battery Charger (with Engine Start) Instruction Manual

Description

This PDF instruction manual is for the CAT CBC25E / CBC25ECA Battery Charger with Engine Start.

About the Item

CAT CBC25E / CBC25ECA 25-Amp Fully Automatic Battery Charger with 75-Amp Engine Start

This battery charger has a high charge rate of up to 25 amps, and 75 amps of engine starting power.
This battery charger features 3-stage, high-efficiency charging technology, built-in microprocessor control that ensures fast, safe and complete charging of serviceable batteries.
– Stage One – Rapid Start Charge at 25 amps delivers maximum charging amperage to “wake up” any serviceable 12 volt battery and allows for quick engine starting. When battery reaches a maximum safe predetermined voltage, the charger will automatically signal a “beep” and move into Stage 2 of the charging process.
– Stage Two – Absorption Charge maintains the maximum possible charge at a constant, safe, predetermined voltage. During this phase, the charging voltage remains constant, while the actual charging current is reduced to allow for the maximum proper internal chemical energy transfer. At the end of Stage 2, the charger will automatically move into Stage 3 charge mode.
– Stage Three – Top-Off Charge – voltage is automatically maintained and reduced to a predetermined level while current is adjusted for a safe, effective battery charge. At the conclusion of Stage 3, the unit will BEEP signaling the completion of the charging cycle.
– The Automatic Float Charge feature is ideal for maintaining a battery. It automatically tops off battery as needed to keep battery fully charged all the time.

Read and understand this instruction manual before using this unit. Save this manual for future reference.

(PDF) INSTRUCTION MANUAL (ENGLISH) / MANUEL D’UTILISATION (FRANÇAIS) / MANUAL DE INSTRUCCIONES (ESPAÑOL)

SUMMARY OF CONTENTS

SAFETY GUIDELINES / DEFINITIONS
– Risk Of Unsafe Operation

IMPORTANT SAFETY INSTRUCTIONS
– General safety warnings and instructions for all battery chargers
– Grounding and ac power cord connection instructions
– Extension cords. Recommended Minimum AWG Size for Extension Cords for Battery Chargers.
– First Aid – Skin, Eyes, LCD Liquid Crystal

PREPARING TO CHARGE
– Charger Location
– Charger Clamp Connection Precautions

INTRODUCTION

CONTROLS AND FUNCTIONS
– Control Panel
– Scrolling Message LCD Display

Function Buttons:
– Charge
– Battery Voltage
– Battery Recondition
– Alternator Check
– Engine Start

OPERATING INSTRUCTIONS
– Setting Up the Unit
– Charging the Battery
– Automatic Float Charging
– Checking the Battery Voltage
– Engine Start
– Reconditioning the Battery
– Alternator Check. Part 1: No Load (Turn OFF all vehicle’s accessories). Part 2: Under Load (Accessories ON).
– Standby Mode

TROUBLESHOOTING
– Reverse polarity (displays and the unit beeps once)
– Internal open cell or sulfated condition
– Internal shorted cell battery
– Overheat condition
– No battery connected

CHARGING A VERY COLD BATTERY

CARE AND MAINTENANCE

ACCESSORIES

SERVICE INFORMATION

WARRANTY

SPECIFICATIONS
– Input: 120V AC , 60 Hz, 450 Watts Continuous
– Output: 12V DC, 25 Amps Continuous, 75 Amp Engine Start, 5 Seconds On, 5 Minutes Off

Why download the Manual?

This instruction manual provides all the information from CAT / Caterpillar about the CBC25E / CBC25ECA battery charger (with engine start), as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .