CAT CLJ1200 Jump Starter Instruction Manual

Description

This PDF instruction manual is for the CAT CLJ1200 1200-Peak Amp Lithium Jump Starter.

About the Item

CAT CLJ1200 1,200-Peak Amp Li-Ion Jump Starter / Portable USB Power

The CAT 1200-Peak-Amp Li-Ion Jump Starter is a compact solution for jump-starting most vehicles on the road today-including most V8-powered cars and trucks. It comes with detachable smart jumper cables that have integrated reverse-polarity protection. This helps ensure you make a proper connection with ease. Also ideal for rapid-charging your compatible smartphones and electronics, the jump starter includes a standard USB port in addition to a USB-C port. The integrated LED work light is helpful for dealing with car trouble in the dark. The 3-bar battery display is quick and easy to read and the jump starter comes with an AC and a DC adapter for charging.

– Delivers 1,200 Amps Peak, Enough To Jump-Start Most Vehicles Including V8 Cars And Trucks
– Works As A Power Bank With 1 Usb Type-A Port And 1 Quick-Charging Usb Type-C Port (Total 3.1 Amps)
– Easy-To-Use, Detachable Smart Cables
– Reverse Polarity Alarm Alerts When There Is An Improper Connection To Battery
– Ultrabright Led Helps Illuminate Work In Dark Areas
– 3-Bar Battery Display Visibly Shows Jump Starter’S Rechargeable Battery’S Status
– Etl/Intertek Listed
– Includes 2-Amp Ac Adapter, 5-Volt 2-Amp Dc Adapter, Usb-A To Usb-A Charging Cable, And Smart Jumper Cables

Read this Instruction Manual and follow the instructions carefully before using this unit. Save this manual for future reference.

DOCUMENT(S) AVAILABLE

(PDF) INSTRUCTION MANUAL / MANUAL DE INSTRUCCIONES

Available Languages

ENGLISH (EN) | ESPAÑOL (ES)

SUMMARY OF CONTENTS

SAFETY GUIDELINES / DEFINITIONS

IMPORTANT SAFETY INSTRUCTIONS

GENERAL SAFETY WARNINGS AND INSTRUCTIONS

SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM BATTERIES
– Battery Charging and Capacity
– Transportation of Lithium Batteries

SPECIFIC SAFETY INSTRUCTIONS FOR JUMP-STARTERS

INSTRUCTIONS PERTAINING TO THE 12V DC/USB CHARGING ADAPTER

INSTRUCTIONS PERTAINING TO THE USB PORTS

FIRST AID
– Skin
– Eyes

INTRODUCTION

FEATURES

VIEWING BATTERY STATUS
The Battery Status LED Indicators indicate the battery charge level as follows:
– If the battery charge level is at full capacity, all three Battery Status LED Indicators light.
– If the battery is at partial charged, two Battery Status LED Indicators light.
– If the battery is nearly empty, only one Battery Status LED Indicator lights. The unit should be charged at this time.
– If the battery is completely empty, only one Battery Status LED Indicator flashes for 30 seconds. The unit MUST be charged at this time or the unit’s built-in low voltage protection will activate and the unit will automatic shut down.

CHARGING / RECHARGING

CHARGING/RECHARGING USING THE 120 VOLT AC/USB CHARGING ADAPTER

CHARGING/RECHARGING USING THE 12V DC/USB CHARGING ADAPTER

CHARGING/RECHARGING USING THE USB CHARGING CABLE AND A DEVICE WITH A USB POWER PORT (NOT SUPPLIED)

OPERATING INSTRUCTIONS

JUMP-STARTING USING THE SMART CABLES
– Battery Clamp Connection Precautions
– Connecting the Jump-Starter Using the Included Battery Clamps
– Procedure

OPERATING THE TYPE C USB PORT, TYPE A USB PORT, AND LED LIGHT
– Type C Port and Type A USB Port Fault Conditions

OPERATING THE 120V AC/USB CHARGING ADAPTER’S USB PORT

OPERATING THE 12V DC/USB CHARGING ADAPTER’S USB PORT

CARE AND MAINTENANCE
– Battery replacement/disposal
– Replacing the Fuse in the 12V DC/USB Charging Adapter

TROUBLESHOOTING
– The unit will not charge
– The Jump-Starter will not start the vehicle
– The LED Light will not operate
– The Type C Port and/or Type A USB port will not operate
– The 120V AC/USB Charging Adapter’s USB port will not operate
– The 12V DC/USB Charging Adapter’s USB port will not operate / 12V DC/USB Charging Adapter LED Indicator does not come on

ACCESSORIES

SERVICE INFORMATION

WARRANTY

SPECIFICATIONS:

Jump-Starter / USB Power Bank (Certified to ANSI/CAN/UL STD. 2743)
– Boost Ampere: 335A (On: 1s, Off: 50s) ; 250A (On: 2s, Off: 50s)
– Input: 5V DC, 2A
– USB Ports: 5V DC, 3.1A max.
– Battery Capacity: Lithium polymer, 11.1V DC
– LED Light: 3 white LEDs
– Charging Temperature: 32°F to 104°F (0°C to 40°C)
– Operating Temperature: -4°F to 104°F (-20°C to 40°C)

12V DC/USB Charging Adapter (Conforms to UL STD. 2089)
– Input: 12V DC, 1.1A
– Output: 5V DC, 2A
– Fuse: 2A

120V AC/USB Charging Adapter (Conforms to UL STD. 62368-1)
– Input: 120V AC, 60Hz, 13.3W
– Output: 5V DC, 2A

Why download the Manual?

This instruction manual provides all the information from CAT / Caterpillar about the CLJ1200 Lithium Jump Starter, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .