CAT PPSCL3 1750A Lithium Professional Power Station Instruction Manual
Download PDF user manual for Caterpillar CAT PPSCL3 (ITM./ART. 1671614) Cube 4-in-1 Lithium Professional Power Station with 1750 Amp (peak) Jump Starter and 120 PSI Air Compressor (EN) 26 pages RD030723 2023 zip
Description
This PDF instruction manual is for the CAT PPSCL3 1750A Lithium Power Station with Jump Starter and Air Compressor.
Caterpillar / CAT PPSCL3 Cube Lithium Professional Power Station with 1750 Amp (peak) Jump Starter and 120 PSI Air Compressor
ITM./ART. 1671614
Read all instructions before operating power station. Save it for future reference.
(PDF) INSTRUCTION MANUAL (EN)
CONTENTS:
FEATURES
DIGITAL LCD SCREEN
– Icons
– Symbols
SAFETY GUIDELINES / DEFINITIONS
IMPORTANT SAFETY INSTRUCTIONS
GENERAL SAFETY WARNINGS AND INSTRUCTIONS
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM BATTERIES
SPECIFIC SAFETY INSTRUCTIONS FOR CHARGING THIS UNIT
EXTENSION CORDS. MINIMUM GAUGE FOR CORD SETS.
SPECIFIC SAFETY INSTRUCTIONS FOR JUMP STARTERS
SPECIFIC SAFETY INSTRUCTIONS FOR INVERTERS
SPECIFIC SAFETY INSTRUCTIONS FOR THE USB PORTS
SPECIFIC SAFETY INSTRUCTIONS FOR COMPRESSORS
FIRST AID
OVERVIEW
Common actions and unit responses:
– How to turn the unit on and activate the LCD screen
VIEWING BATTERY STATUS
– How to check the unit’s battery charge level
CHARGING/RECHARGING
– Important Charging Notes
– Procedure
– USB Charging Cable and a Device with an USB Power Port
JUMP-STARTING USING THE SMART CABLES
– Battery Clamp Connection Precautions
– Connecting the Jump-Starter Using the Included Battery Clamps
– Procedure
PORTABLE COMPRESSOR
The built-in compressor is the ultimate compressor for all vehicle tires, trailer tires and recreational inflatables.
– Inflating tires or products with valve stem
– Inflating other inflatables without valve stems
USB PORTS
– Using the USB-A Power Port
– Using the USB-C Power Port
120 VOLT AC POWER OUTLET
– Rated versus actual current draw of equipment
– Power inverter output waveform
– Protective features
– Using the 120 Volt AC outlet
LED LIGHT
TROUBLESHOOTING
Possible Problems:
– Unit not charging
– Engine fails to jumpstart
– Portable Compressor will not inflate
– LED Area Light does not come ON
– USB Power Port will not power appliance
– 120 Volt AC outlet will not power appliance
ACCESSORIES
SERVICE INFORMATION
WARRANTY
SPECIFICATIONS
Boost Ampere: 1750A Max.
Battery Type: Lithium polymer, 11.1V DC
Input: 5VDC 3A / 9VDC 3A / 12VDC 2.5A / 15VDC 2A / 20VDC 1.5A (PD 30W) or 5VDC 2A MAX.
Compressor: 120 PSI (max.)
USB-A Output: 5VDC / 9VDC / 12VDC, 15W MAX.
USB-C Output: 5VDC 3A / 9VDC 3A / 12VDC 2.5A / 15VDC 2A / 20VDC 1.5A (PD 30W MAX.)
USB-A and USB-C used simultaneously: 5VDC, 15W MAX.
120V AC Power Outlet: 120V AC, 60Hz, 200W
CARE AND MAINTENANCE
– BATTERY REPLACEMENT/DISPOSAL
– SAFE BATTERY DISPOSAL
Why Download the Manual?
This instruction manual provides all the information from CAT / Caterpillar about the PPSCL3 Cube lithium power station with jump starter and air compressor, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.
How to Download the Manual?
Download it by clicking the button below
Helped you out?
Glad to hear that. It would be awesome if you could . . .
