EcoFlow WAVE 2 Portable Air Conditioner EFKT210 User Manual

Description

This PDF user manual is for the EcoFlow Wave 2 Portable Air Conditioner with Heater.

About the Item

EcoFlow WAVE 2 Portable Air Conditioner, Model EFKT210 (with Heater)

The world’s first wireless portable AC with heater. EcoFlow’s tailor-made compressor enables WAVE 2 to provide 5100 BTUs of cooling and 6100 BTUs of heating. Get ready for the ultimate comfort with WAVE 2!
* Drop 18 deg F from 86 deg F for 10m cu.m. in 5 min with 5100 BTUs of cooling,and raise 18 deg F from 68 deg F in 5 minutes for 10m cu.m. with 6100 BTUs of heating in optimal running performance.

With EcoFlow’s advanced software algorithm, the WAVE 2 offers multiple modes and app control. It runs quietly (44 dB) in Sleep Mode and up to 8 hours in Eco Mode. Experience longer-lasting comfort in your tent, RV, or home with its powerful and portable design.

WAVE 2 uses R290, a natural refrigerant that’s clean, green, and perfect for a relaxing cooling experience. With lower global warming potential and no ozone emissions, it’s the ideal way to stay cool and comfortable compared to traditional refrigerants while reducing your carbon footprint.

WAVE 2-the ultimate air conditioner and heater that comes with a swappable battery! Charge it fast with AC, solar, a car, or power stations. Enjoy cool or warm air anytime, anywhere, with the flexibility of multiple charging options.

Pair with an EcoFlow DELTA 2 / DELTA Max or their extra batteries and get an astonishing 7-14hr run time in Eco Mode. Compared to using other portable power stations, it’s 28% more efficient. You can also use any portable power station with a 820W input to charge your WAVE 2.

– 5-minute warmth in any compact space.
– Fastest Cooling and Heating
– Installation-free! Fits Anywhere
– 8 Long Hours of Comfort (With Add-on Battery)
– 44dB: Perfect For Quiet Sleep
– Using R290: A Greener Way to Beat the Heat
– 4 Ways to Charge

SPECS
– AC Input: 100/240V, 50/60Hz, 820W Max
– Solar Charging Input: 11-60V, 13A, 400W Max
– Car Charging Input: 96W/192W (12/24V, 8A Max)
– Add-on Battery Power: 700W Max
– Net Weight: Approximately 14.5 kg (32.0 lbs)
– Dimensions: 518 x 297 x 336 mm (20.4 x 11.7 x 13.2 in)
– Bluetooth: yes
– Wi-Fi: This product supports 2.4G Wi-Fi only
– Noise Level: 44-56dB
– Refrigerant/Amount: R290/130 g
– No-Drain Function: Supported (in cooling state)
– Cooling Area: less than 10 sq.m. / 107.6 sq.ft.
– IP Rating: IPX4
– Rated Cooling Input Power (AC/DC): 550W/495W
– Cooling Capacity: 1500W/5100BTU
– Rated Heating Input Power (AC/DC): 600W/540W
– Heating Capacity: 1800W / 6100BTU
– Operating Temperature: 5 deg C-50 deg C (41 deg F -122 deg F)
– Charge Temperature: 0 deg C-45 deg C (32 deg F -113 deg F)
– Discharge Temperature: -20 deg C -50 deg C (-4 deg F -122 deg F)
– Ambient Temperature for Storage: -10 deg C -60 deg C (14 deg F -140 deg F)
– Temperature Setting Range: 16 deg C -30 deg C (60 deg F -86 deg F)

Please note that WAVE 2 does not have a built-in battery and requires battery (Add-on Battery or DELTA series) or AC power connected to operate in its optimal performance.

Please read the product document and ensure that you understand it fully before using the product. After reading this document, keep it for future reference.
This document is subject to changes (updates, revisions, or termination) without prior notice. Please visit EcoFlow’s official website to obtain the latest product information.

(PDF) USER MANUAL (ENGLISH) / MANUAL DO UTILIZADOR (PORTUGUÊS)

SUMMARY OF CONTENTS

SPECIFICATIONS
– Cooling/Heating Specifications
– Input Specifications
– Other Specifications
– Energy Rating
– General Information

SAFETY INSTRUCTIONS
– Use
– Grounding Guide

ECOFLOW APP
Control, monitor and customize your EcoFlow WAVE 2 from afar with the EcoFlow app.

WHAT’S IN THE BOX

PRODUCT DETAILS
– Overview. Product view. Names of parts.
– Introduction to Indicator Lights:
Pulsating blue = Cooling status
Pulsating orange = Heating status
Pulsating white = Fan status
Solid red = Error alarm
Flashing white = Firmware update

LCD
– Icons and symbols description

CONTROL BUTTONS
– Function selector
– Mode selector (available for cooling/heating only)
– Temperature –
– Temperature +
– Fan speed
– Power button

If WAVE 2 is idle for 5 minutes, the LCD and ambient light will turn off automatically (The power standby time can be set in the app). Press any button to wake them up.

– How to shut down?
– How to switch Cooling / Heating / Fan functions
– How to reset Wi-Fi and Bluetooth
– How to switch Max / Sleep / Eco / Custom modes
– How to set temperature
– How to switch temperature units – Celsius / Fahrenheit
– How to set fan speed (low/medium/high)

GETTING STARTED

HOW TO INSTALL
When using the cooling or heating function, please make sure you’ve installed the exhaust duct and adapter cover to WAVE 2, otherwise it will affect the air conditioner’s working efficiency. It is recommended that the space is within 20m cu.m. for better working performance.
– Indoor Use
– DIY Window Vent Board
– Outdoor Use
When the interior space is small or noise avoidance is required, WAVE 2 can be placed outdoors and deliver cooling or heating through the front air outlet.

HOW TO POWER-ON
This product supports multiple power supply methods. Open the charging port cover before using it, then power on. Please close the cover to prevent dust during charging, and wind the AC charging cable around the winder.
– AC Outlet: WAVE 2 supports an AC voltage from 100-240V. Please use the original AC charging cable and make sure the working current of the outlet should continuously exceed 10A .
– Battery pack: The EcoFlow WAVE 2 add-on battery or EcoFlow portable power stations (DELTA and DELTA 2 series are recommended) can be used to supply power to WAVE 2.
– – 1. WAVE 2 Add-on Battery
– – 2. EcoFlow portable power stations (XT150 DC output port is recommended)
– Solar Panel/Car Charging Port: When charging using a solar panel, please confirm that the output voltage and current of the solar panel is within the specified range (11-60V/13A), and check the solar panel user manual.

HOW TO DRAIN
– WAVE 2 has drain-free function. When the cooling function is on, condensation evaporates through flash distillation. When the heating function is in use or the ambient humidity is too high, condensation cannot be drained completely using flash distillation.
– External drainage: How to turn it ON and OFF.
– Manual drainage: A small amount of residual water will be left at the bottom of the water tank after external drainage. Please remove the connecter, and tilt the unit back slightly until the condensation is completely drained.

HOW TO CLEAN

CARE AND MAINTENANCE

(PDF) ECOFLOW WAVE 2 TROUBLESHOOTING GUIDE

3 pages V1.0

SUMMARY OF CONTENTS

FAULT CODE – ERROR TYPE – SOLUTION
1 – Battery pack voltage is too high
2 – Battery pack voltage is too low
3 – AC output current is too high
4 – Bus voltage is too high
5 – Bus voltage is too low
6 – XT60 port temperature is too low
7 – XT60 port temperature is too high
8 – AC input current is too high
11 – PSDR board temperature is too high
12 – PSDR board temperature is too low
13 – The fan has stalled
14 – Output current of XT60 port is too high
15 – Input voltage of XT60 port is too high
16 – AC input voltage is too high
17 – AC input voltage is too low
18 – Input voltage frequency is too high
19 – Input voltage frequency is too low
30 – Short circuit
31 – Compressor start-up error
32 – Compressor operation error
33 – High appliance temperature
34 – Low appliance temperature
35 – Overvoltage
36 – Undervoltage
37 – Exhaust
38 – Front fan error
39 – Rear fan error
40 – Fluorine shortage
41 – Overload
50 – Motor board communications error
51 – Power board communications error
52 – WiFi communications error
53 – Temperature sensor error

If the problem persists, please contact Ecoflow after-sales service.

Why download the Manual?

This user manual provides all the information from Shenzhen EcoFlow Technology about the WAVE 2 Portable Air Conditioner, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .