MOTOPOWER MP00205B Battery Charger Owner’s Manual and User Guide
Download PDF user manual for Motopower MP00205B 12V 1000mA Fully Automatic Battery Charger/Maintainer (EN|FR|ES|DE|IT|JA) 2019 zip
Description
This PDF instruction manual is for the Motopower MP00205B Fully Automatic Battery Charger/Maintainer.
About the Item
MOTOPOWER MP00205B 12-Volt 1000mA Fully Automatic Battery Charger / Maintainer
Premium Automatic Battery Charger Series – Optimizer X
It’s not a traditional charger or maintainer. With the up-to-date charging technology, it applies the pulse charging technology by giving a slight pulse current at the proper stages to boost the battery so as to maximize the battery performance and extend the battery life.
Fully automatic operation with safety protections. Simply plug-in and leave it. No worry about overcharge. It will stop charging when charged and then maintain the battery at 13.6V indefinitely. Spark-free technology applied for safety.
Easy-to-read LED indication to let you know the different modes during the charging progress. Zero output in standby mode without connecting with the battery to save energy. No battery drain when connecting with the battery.
Prior to use, read and understand the following instructions.
(PDF) INSTRUCTION MANUAL (ENGLISH) (FRANÇAIS) (ESPAÑOL) (DEUTSCH) (ITALIANO) (日本語)
SUMMARY OF CONTENTS
– Caution
– Preparing to charge
– Charger location
– Follow these steps when battery is installed in vehicle.
– Follow these steps when battery is outside vehicle.
– User instructions
– Automatic charging and battery status monitoring
– Working with a dead battery or a battery with a very low voltage
– Status indicating lights
– Troubleshooting check list:
1. Charger lights does not turn on:
a. Check to make sure AC outlet is supplying power by plugging in a lamp, an appliance, or a voltage meter.
2. The green light goes on immediately when charging a discharged battery:
a. The battery may be defective, take battery to the dealer to be tested.
3. Charger is charging but the green light does not go on:
a. The battery may be defective, take battery to the dealer to be tested.
b. The battery has an excessive current draw, remove battery from equipment.
– Specifications
Why download the Manual?
This instruction manual provides all the information from MOTOPOWER about the MP00205B Battery Charger / Maintainer, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.
How to download the Manual?
Download it by clicking the button below
Helped you out?
Glad to hear that. It would be awesome if you could . . .
