MOTOPOWER MP00207A Smart Battery Charger Owner’s Manual and User Guide

Description

This PDF instruction manual is for the Motopower MP00207A Smart Battery Charger/Maintainer.

About the Item

MOTOPOWER MP00207A 12-Volt 2-Amp Smart Battery Charger / Maintainer

For both 12V lead acid batteries and 12V lithium ion batteries

Fully Automatic – No need of any manual operation, just plug and leave it for charging and maintaining your batteries automatically for long time.
Micropressor Controlled 4-Stage Charge – Diagnosis, Bulk charge, Absorption and Maintenance. The microprocessor controlled program will automatically charge the battery at proper charging rate in each stage and maintain the battery at proper voltage for long time.
Multi-level safety barrier prevents unsafe and abnormal conditions. No worry about overcharge, short circuit and reverse palarity; Spark Free Technology.
4 LED Indicators: Power, Charging, Charged/Maintain and Reverse Connection.

Prior to use, read and understand the following instructions.

(PDF) INSTRUCTION MANUAL (ENGLISH) (FRANÇAIS) (ESPAÑOL) (DEUTSCH) (ITALIANO) (日本語)

SUMMARY OF CONTENTS

– Caution
– Preparing to charge
– Charger location
– Follow these steps when battery is installed in vehicle.
– Follow these steps when battery is outside vehicle.
– User instructions
– Troubleshooting guide:
1. The power on LED doesn’t turn on:
a) – Check to make sure AC outlet is supplying power by plugging in a lamp, an appliance, or a voltage meter.
2. The charge LED doesn’t turn on:
a) There’s connection problem between the charger and the battery. Check the connections and try both the alligator clamp cable and the ring terminal cable.
b) The battery voltage is below 8 volts. For safety design, if the battery voltage is below 8 volts, the battery charger will not charge the battery in case of risks. Having the battery checked by a professional.
3. Charger is charging but the green light does not go on:
a) The battery may be defective, take battery to the dealer to be tested.
b) The battery has an excessive current draw, remove battery from equipment.
4. The green light goes on immediately when charging a discharged battery:
a) The battery may be defective. It cannot hold the charge. Take battery to the dealer to be tested.
– Specifications

Why download the Manual?

This instruction manual provides all the information from MOTOPOWER about the MP00207A Smart Battery Charger / Maintainer, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .