SentrySafe DH-134E Digital Depository Safe Owners Manual
Download PDF user manual for Master Lock / SentrySafe DH-134E Digital Depository Safe 1.57 cu ft (EN|ES|FR) 9 pages P556688 2017 zip
Description
This PDF user manual is for the SentrySafe DH-134E Digital Depository Safe.
About the Item
SentrySafe DH-134E 1.57 cu.ft. Digital Depository Safe
The SentrySafe depository safe is an ideal choice for storing cash, checks, depository slips, credit cards and other important documents. Ideal for convenience stores, restaurants, bars, hotels/motels, small cash businesses, pawn shops, independent store fronts and not-for-profit operations.
(PDF) OWNER’S MANUAL (ENGLISH) (ESPAÑOL) (FRANÇAIS)
SUMMARY OF CONTENTS
– Getting started
– Installation of the batteries
– Programming your lock codes
– Changing the Master Code
– Changing the Manager Code
– Activate user codes
– Changing the User code
– Deleting user codes
– Dual user mode
– Time delay mode
– Floor mount. Required tools. Instructions.
– TROUBLESHOOTING:
LOW BATTERY WARNING
The green LED light will signal in red when opening your safe. The lock is giving you a valid signal but is not unlocking.
CHANGING YOUR BATTERIES
1. Turn the keypad housing counterclockwise and carefully pull away from the mounting plate to expose battery compartment.
2. Remove the four AAA Alkaline batteries and replace. Caution: Hold onto the keypad housing to avoid pulling wires.
3. Carefully position the keypad into the inserts on the mounting plate and turn clockwise. Ensure that there are no wires or cables trapped between the keypad and the mounting plate.
THE LOCK HAS NO RESPONSE (no flash, no beeps)
– Make sure the wires in the keypad housing are not pinched and are securely connected.
– Check to make sure the batteries are correctly and securely inserted into the battery compartment.
– Lock can possibly be in the lockout penalty, wait five (5) minutes, and check if the lock responds.
– Replace the existing batteries with new ones.
THE LOCK IS RESPONDING BUT DOES NOT UNLOCK
– Make sure you are getting a valid response.
– Make sure you get a signal with every key stroke.
– Make sure you are not in time delay mode. (See “time delay mode”)
– Replace the existing batteries with new ones.
– If the lock still does not open, contact Sentry Group Customer Care
Factory Pre-set Master code: 777777
Factory Pre-set Manager code: 0000
Why Download the Manual?
This user manual provides all the information from Master Lock Company / SentrySafe about the DH-134E Digital Depository Safe, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.
How to Download the Manual?
Download it by clicking the button below
Helped you out?
Glad to hear that. It would be awesome if you could . . .
