SentrySafe OA3810 Fire-Safe Electronic Safe Owners Manual

Description

This PDF user manual is for the SentrySafe OA3810 electronic safe.

About the Item

SentrySafe OA3810 Fire-Safe Electronic Safe

FEATURES
– UL Classified 2-hour proven fire protection with impact
– UL Classified 30 ft. Drop Test
– ETL verified for 2-hour fire protection of CDs, DVDs, Memory Sticks and USB Drives up to 1850 deg F
– $30,000 Fire Protection Guarantee (US dollars)
– Water-resistant
– Advanced LCD electronic lock system with backlit keypad, programmable PIN access and tubular key lock
– Allows up to (7) user: (1) manager with program override capability and (6) additional users
– Each user has an individual PIN
– PINs may be created using 4-8 digits
– 5 digit factory access code setting when shipped
– 6 live-locking bolts
– Metal handle
– Multi-position shelf
– Key rack and compartment for small items
– Door pocket
– Holds standard and A-4 size papers, folders and binders
– May be bolted to floor (hardware included)
– Color: Black and gunmetal gray

SPECIFICATIONS
– Capacity: 1.2 cu. ft. / 33.6 liters
– Average Product Weight: 135 lbs. / 61.2 kg
– UPC: 049074007447

This guide describes how to easily set up your safe.

Document(s) available

(PDF) OWNERS MANUAL / MANUEL DU PROPRIÉTAIRE / MANUAL DEL USUARIO

Available languages

ENGLISH (EN) | FRANÇAIS (FR) | ESPAÑOL (ES)

SUMMARY OF CONTENTS

GETTING STARTED

GAIN ENTRY WITH THE COMBINATION LOCK
The handle should be all of the way UP, in the horizontal position before attempting to dial out safe.
– Opening your safe for the first time (keep door open during setup)
– Testing your combination
– 3-Number Combination: How to unlock and open. How to close and lock.
– 4-Number Combination: How to unlock and open. How to close and lock.

GAIN ENTRY WITH THE BASIC ELECTRONIC LOCK
The handle should be all of the way UP, in the horizontal position before attempting to open safe.
– Opening your safe for the fi rst time (keep door open during setup)
– How to unlock safe
– How to lock safe
– Access codes: 1. Factory code; 2. User code; 3. User pin.
– Programming the user code: How to add / delete.
– Programming user pin: How to add / delete.
– Signals
– Red (Error) LED + three beeps indicates one of the following
– Green LED only
– Yellow LED only

GAIN ENTRY WITH ADVANCED ELECTRONIC LOCK
Opening your safe for the fi rst time (keep door open during setup).
– How to unlock safe
– How to lock safe
– Battery replacement
– Icon identification
– Access codes: 1. Factory code; 2. Manager code; 3. User code
– Programming the manager code: How to add / delete.
– Programming the user code: How to add / delete.

FLOOR MOUNT
– Tools needed for floor mounting
– Instructions

TROUBLESHOOTING
If electronics are not functioning, replace batteries first (behind electronic lock case) as described in step one of this guide.

If electronics are functioning and you cannot get into safe:
– Pull handle up
– Follow instructions for opening your lock type.

You must use both the key (if equipped) and the electronic code to open the safe if the key lock cylinder is pushed in.

DELAY MODE
Enters a two-minute delay mode after an invalid code has been entered three consecutive times. In this mode, the lock can not be activated and any key entry will generate an ERROR signal.

Please note: Your safe’s serial number is required to obtain replacement combination/keys. The serial number can be found near the door hinge as shown or at the beginning of this guide.

WARNINGS

Why download the Manual?

This user manual provides all the information from Master Lock Company / SentrySafe about the Fire-Safe A3810 electronic safe, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to download the Manual?

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .